Register: Moisture quality
stable
URI: http://codes.wmo.int/bufr4/codeflag/0-33-026
no description supplied
Contents
Name | Notation | Description | Types | Status |
---|---|---|---|---|
Normal operations measurement mode | 0 | Concept | stable | |
Normal operations non-measurement mode | 1 | Concept | stable | |
Small RH | 2 | Concept | stable | |
Humidity element is wet | 3 | Concept | stable | |
Humidity element contaminated | 4 | Concept | stable | |
Heater fail | 5 | Concept | stable | |
Heater fail and wet/contaminated humidity element | 6 | Concept | stable | |
At least one of the input parameters used in the calculation of mixing ratio is invalid | 7 | Concept | stable | |
Numeric error | 8 | Concept | stable | |
Sensor not installed | 9 | Concept | stable | |
Calculated RH > 100% | 10 | Concept | stable | |
Input laser power too low | 11 | Concept | stable | |
Probe WV temperature out of range | 12 | Concept | stable | |
Probe WV pressure out of range | 13 | Concept | stable | |
Spectral line out of range | 14 | Concept | stable | |
No laser output | 15 | Concept | stable | |
Missing value | 63 | Concept | stable |